In order to view all images, please register and log in. This will also allow you to comment on our stories and have the option to receive our email alerts. Click here to register
08.04.2011

Sling failure drops ferry

A large boat being loaded onto a larger ocean going cargo ship in Galway harbour, Ireland, was dropped yesterday after one of the lifting slings broke. Three men were taken to hospital with non life threatening injuries.

The injured men were aboard the ferry as it was bing lifted, why is not clear. The normal practice is that the boat being lifted is evacuated, once the slings are tight. The boat was being lifted by the cargo ship's two ship to shore cranes in a tandem lift.

The boat, the Clann na nOileain, built for the Aran Island run, was around 11 metres in the air when one of the slings broke, dropping the boat stern first into the water. A minute or two later and the boat would have been over the Danish cargo ship – the Thor Gitta and the men who would have been guiding it in the ships hold.
Please register to see all images

The Clann na nOileain is dropped in Galway Harbour


The boat is one of two ‘sister’ ferries built for the new Aran Islands service, that have been sold to a company in Mauritius following the bankruptcy of the Irish company that had them built. A ship carrying the other ferry –the Clan Eagle 1- ran aground last week in Casla Bay off Rossaveal and is awaiting repair before continuing on to Mauritius.

Vertikal Comment

Rigging and sling failure in harbours appears to happen way too frequently, and all too often when loading unusual loads, such as medium sized boats such as this one – or mobile cranes – (see our video section).

There really is no excuse for such failures. Modern good quality slings are excellent and as long as looked after and maintained will very very rarely fail.

Accidents such as this are invariably caused by poor slinging/rigging caused possibly by an over familiarisation by staff who one has to assume lack the in depth training to sling such loads?

Given the dangers of falling loads, not to mention the costs, this is an area that the evidence suggests needs to be tightened up

Comments

Mark Krajci
This shows the importance of inspecting the rigging and the way it is rigged before EVERY lift even if you have made this lift before and on the same day.
One can never be too cautious in making these types of lifts and should always be mindful of what can happen.
Think First - Be Safe!

Apr 8, 2011