17.04.2014

Terex launches its biggest luffer

On Tuesday, Terex unveiled its largest luffing tower crane to date, the 1,600 tonne/metre, 66 tonne maximum capacity CTL 1600-66 - at a customer event at its test facility near Fontanafredda in Italy.
The CTL1600-66 can lift 16 tonnes at the end of its 75 metre jib

The crane, which has a maximum capacity almost 50 percent more than its previous range topper, can lift 16 tonnes at the end of its 75 metre maximum jib tip. Its previous largest luffer - the CTL 650F-45 - has a maximum capacity of 45 tonnes and can lift seven tonnes at its maximum 65 metre radius.
Terex’s dealer in the UK - Select Plant - has ordered the first two cranes

The Terex range now covers capacities from eight to 66 tonnes, with jib lengths from 50 to 75 metres and jib tip capacities of 1.8 to 16 tonnes.

Terex’s dealer in the UK - Select Plant - has ordered the first two production cranes – the first being the launch machine – which are thought to be heading for contracts in the Manchester and London areas.
The new HD33 tower system uses six metre by 3.3 metre sections with pre-assembled ladder, tower platform and a new connection system for improved safety and speed.

The new luffer uses a 12.5 metre square base with the electrical box on the tower access platform, above the ballast. This has two advantages - being out of the way and difficult to reach for non-authorised people, and also a better solution when used with a travelling chassis. There are also two tower platforms which aid assembly.
The new Terex CTL 1600-66

A new tower system - the Terex HD33 - is also used with its six metre by 3.3 metre sections, pre-assembled ladder, tower platform, and a new connection system for improved safety, speed and lifting points for vertical and horizontal positioning. Terex engineers said the tower would also be suitable for a larger luffer model up to 2,000 tonne/metres should demand for such a crane exist.
The 12.5 metre square base

Maximum free standing height on concrete, with this tower is 89 metres, or 87.9 metres on a fixed chassis, and 83 metres on a traveller. External and internal climbing is available to suit most requirements. A combination of fixed and mobile ballast gives the best balance when erecting and operating the crane. The amount of ballast varies with jib length - for 45 to 75 metres the mobile ballast consists of 10, 7.5 tonne blocks, while less ballast is required for shorter jib lengths.

Jib lengths are increased in five metre sections from 40 to 75 metres and include LED warning lights and double platforms on the jib end. The foldable 'A' frame can be transported on one truck and is ready to be erected. It also includes an in-built ladder with anti-fall device, two anemometers with wind speed and direction and LED lighting.
Winches, static and moveable ballast

All functions are frequency controlled for fast, precise load positioning the 150kW hoist has a maximum rope capacity of 960 metres and a speed of 185 metres a minute with 2.5 tonnes and 12 metres when lifting 66 tonnes. A 150kW hoist raises and lowers the jib taking about one minute 45 seconds to raise it fully.

Tele Assistance allows all the relevant data to be checked remotely, including historical data and work hours, active alarms and alarm history. The latest EVO 15 cab incorporates monitors for jib end and counter jib cameras.

Comments

Another heavy lifter for Select then!

Apr 22, 2014

Michael Brown
Oooo yes please..................

Apr 17, 2014
This website is using cookies to provide an optimised user experience. By continuing you are agreeing to the use of cookies. More Info
OK