The Betamax stand with James Liu sales director
Around the back an MG mast type self-propelled lift available with up to 11 metres working height
And a five metre working height MK 300 push around model Pain on all of them seemed excellent.
The Demag AC220-5 was sold in Singapore
EHM-Eastman with chairman and access industry veteran Mike Zhou – in the suit.
EHM’s 12ft all electric E-12 mast lift
They make these up to 35 metres! This one on a new self-propelled chassis supposedly has a working height over 18 metres. Made by Extreme which also supplies scaffold towers to SGB apparently
Looks like night – this was midday!
Genie launched two locally made simpler scissors the Genie Reach 12 and 14 with 32 and 38.5ft platform heights respectively and a non-Genie blue colour scheme.
Yet another scissor lift manufacturer – Gorly that admitted copying Dingli even down to the nomenclature "to make it easier for customers"
A new Goman 21 metre spider lift the X21
Right at the back a little spider crane no one on the stand could talk about – the serial number plate revealed it to be a GMC 301t with 8.8 metre boom weighing 2,800kg
The new 86ft Haulotte HT280RTO – mentioned yesterday - has all manner of new new detailed developments, from Stop Emissions engine stop system to Activ Lighting
...to the clever Active safety lights system incorporating nine LED lights into the machine, all of them cleverly incorporated and fully protected.
A special airline adapted scissor lift with lateral slide out deck extension from Huabei Lifts
JLG launched the Chinese built 110ft Shipyard boom with up to 18.4 metres of outreach, 250kg platform capacity, a 1.6 metre articulated jib and built-in hostile environment features to cope with blasting etc.
The first unit has been sold to local company Horizon
The 26 metre Hinowa built JLG X26 Plus spider lift makes its Chinese debut
Only one crane on the Liebherr stand, a 300 tonne LTM 1300-6.2 that has been sold locally, the company maintains its boycott of the tower crane market.
A CBL industrial type telehandler has an 8.5m lift height lifts up to 3,000kg, 2,000kg to full height and has a forward reach of 4.5m with 1,000kg
The new 8 tonne ‘prototype’ Potain MCH 120 hydraulic luffer – comprises four contrainer loads the slewing section with cab which can be mounted on either side - 50m jib can handle 2,000kg
…The back-mast complete with hoists, jib butt section and lift cylinder and fixed counterweight weighing just under 11 tonnes.
Sinoboom’s GTZZ16EJ electric articulated boom has a pretty rear end……but….
It’s a bit of a ‘bruiser’ around the front, but does look like a good machine
Spot the man sweeping the roof of the Zoomlion roof, he close a couple of times to going over the top – Death Wish in action
A Sunward 55 tonne telescopic crawler, the SWTC 55B with 43.5 metre main boom. The company is also launching 16 tonne City type Rough Terrain cranes with 55kph road speeds,
Day two was worse that day one, BUT day three was sunnier and colder
Register today in order to add your own comment, it barely takes a minute.
Comments