Although exhibitor numbers were drastically reduced, there were areas that were busy
Airone loader cranes
Cela was showing off its new DT28 and DT30 truck mounted platforms
CMC unveiled a 32 metre spider lift that tragically overturned with a man in the platform. After striking two machines on the Cela stand the lower boom came down across the Cela D24 truck mounted lift.
The basket of the 32 metre spider ended up entangled in the roof of a nearby building
The cause of the accident is still being investigated
The 26 metre CMC TB260
Colombo showed a straight boom and articlated machine - this is the 20 metre TLD20
Comet was showing its range of innovative products
The new Cormach 135000 XE ASC Plus
Cormach had an impressive line-up of loader cranes on its sizeable stand
There were several platforms for loader cranes on display. When mounted on the Cormach 230000A this basket has a 50 metre working height, 39 metre outreach and 400kg capacity.
Cormidi KB19 and KB22 spider/crane
The new CTE Zed 20.2 H
The CTE Zed 23JH was also shown for the first time
Dieci unveiled its 10 tonne capacity, 9.5 metre lift height Hercules 100.10
The new Easy 180 has 18 metre working height and 11 metres outreach.
Although a prototype, Easy has kept the overall weight of the Easy 180 low, by folding its outrigger foot back into the main leg.
there were several mastclimber and hoist manufacturers exhibiting including Electroelse.
Fassi was showing this new F120 loader crane
The Ferarri loader crane stand
GSR unveiled its E210PXJ - a 20.5 metre working height, 9.9 metre outreach platform with 250kg basket capacity, mounted on a 3.5 tonne chassis
Several major access manufacturers - including Haulotte - were represented by their dealers.
Hinowa had a large stand which included the new Lightlift 20:10 spider lift
The Isoli stand
Iteco launched the Easy Up 5 Picking which has a 120kg basket capacity and 80kg capacity on the manually adjustable tray
A 900kg capacity JMG glass lifter
Bluelift now manufactures and sells and supports the KLM range of small loader cranes
One of the few cranes at the show, the Locatelli Gril 8700T was seen at Intermat but the company says it is launching the 75 tonne Gril 8800T at Bauma next year
Maber had a full stand with mastclimbers and hoists
Italian manufacturer MDB showed this folding tracked loader that can be carried under the chassis. Maximum lift height is 2650mm and maxumum capacity is 1,500kg
Merlo showed its even more compact P25.6L which has a modified cab to reduce the overall height to 1770mm
This specially modified Merlo Roto 60.24 MCSS has an additional set of wheels for tunnel work
Multitel had one new platform - the 20.1 metre working height, 9.8 metre (225kg) or 12.6 metre(80kg) outreach MJ201
This is the first of a new range for Easy
What else do you do with very few visitors around?
Oil&Steel's new 22.3 metre working height Octopussy 2300 evo
An 80/100 tonne Ormig truck crane with 36 metre boom
A trio of Palazzani spider lifts - the TZX225, TSJ27 and XTJ32
Palfinger launched three new loader cranes including the PK 41002EH, PK12502 SH and the PK 10002 SH
The Platform Basket stand
The innovative Romano Ferrari RF333 loader crane
The 22 metre working height Safi SCA 22 articulated truck mounted platform
Safi showed off its TST 500 tunnel platform system
Italian manufacturer Salerno Ponteggi showed of its mastclimbers
Snorkel machines on the Comaco stand
Another Italian loader crane manufacturer - Powerlift - was showing its Stern range
The TCM RTC 28 telescopic crawler crane
The tunnel inspection platform - the Tunlift 737-500 - attracted a lot of interest
Register today in order to add your own comment, it barely takes a minute.
Comments