06.06.2019

First JCB 360 degree telehandler

JCB has unveiled its first 360 degree telehandler in a launch to the press at its plant in the UK.
JCB Hydraload 555-210R

The new model - dubbed the Hydraload 555-210R - will be the first in a range of models and offers a maximum capacity of 5.5 tonnes and a maximum lift height of 20.5 metres. It can also take 2.5 tonnes to full lift height or handle 850kg at its maximum 18.5 metres forward reach. Free on wheels it can lift 4.5 tonnes.
The new telehandler can lift 5.5 tonnes

Detailed specifications are not yet available but the Hydraload features Automatic one touch outrigger deployment, stowage and levelling. The machine can also be operated with the outriggers set up inboard - within the machine’s overall width or each beam can be extended to any length depending on the space available. Maximum road speed is 40kph.

JCB says it launched the machine because of the growing popularity of rotating telehandlers with heavier lift capacities in Europe. It is also hoping that the changing construction methods used for the construction of modular homes will create more demand.

The 555-210R is powered by JCB’s Ecomax engines, offering a high degree of parts and service commonality with other JCB telehandlers. A low boom design is said to provide improved all round visibility, as do comprehensive work light options and camera kits, including a boom head camera to make placement of loads at full height easier. The JCB LiveLink telematics system is fitted as standard.

A range of specially developed attachments using RFID technology can be identified by the machine and then automatically offer the correct load chart for safe operation. At the launch, they include pallet forks, a 5.5 tonne carriage winch, a two tonne x two metre jib winch, a reduced height jib, 5.5 tonne hook, light duty buckets and a range of fork mounted accessories, such as waste and concrete placing skips. Remote lift end operation and access platforms will also be offered.

“The Hydraload 555-210R will meet the changing requirements of contractors across the world, as a greater use of off-site pre-fabrication calls for heavier lift capacities and increased on-site versatility,” said Tim Burnhope, chief innovation & growth officer. “Rotating telescopic handlers have become a genuine cost-effective replacement for smaller mobile cranes, offering rapid set-up and the ability to carry out technical lifting operations.”

Comments

Tmayes
Talk about joining a party late, all we are left with is a drunken fat girl in the corner, Merlo and maniscopic have been manufacturing these for absolutely years and have perfected these machines, where as JCB still haven’t perfected the controls to make it easy for the operator to operate.

6 Jun 2019

Robert Page
Nice machine with great features...HOWEVER it will required trained operators that understand the principles of crane operation. Otherwise there will many incidents.

6 Jun 2019

Buns
What facility, other than an inclinometer, gives the operator an indication that he is at the limit of lateral instability?

6 Jun 2019
This website is using cookies to provide an optimised user experience. By continuing you are agreeing to the use of cookies. More Info
OK